Gear quality/ pinning

[K. Bone]

Ok guys I got some gear from a friend and it's fucking hard to push in. I'm using deca and test cyp. It's working from what I can tell. But I've only been on one other cycle for 6 months and it was never hard to push in. Does this have to do with the quality of the gear? Would there be that much scar tissue being built up. I did pin a lot cause I ran tren (I already know, first cycle and using tren bad idea, I was obliviously to everything and super new and all I had was this asshole who wanted to make money and I did no research. The dude pulled the wool over my eyes). Anyway is this normal I mean I got to push hard as I can no matter where I pin. Quads, ass, etc. but I don't remember having this issue when I ran the first cycle. I pin with a 23 gauge and mix them in one pin for one shot.

Also does this have anything to do with the quality of the gear? And how do I know it's quality stuff. I also have recently got something from D-Red, shouts out to that stand up mothafucka, and please feel free to express your thoughts and opinions on his gear quality because I will be using him from here on out after I go through this first 2 months of what I have. But that dude is a real mothafucka hands down. D-Red you know what I mean.... my appreciation to you my man and really to everyone in this forum. Shouts out to Poohbear also for just extending his hand to a new guy and guiding me here and on this process. Much love guys. I need some feedback.


Sent from my iPhone using Tapatalk

 

[Hevi-head]

Different carrier oils have different viscosity. Even some human grade is really thick.
Try warming it and see if that helps.
Btw there's a shit ton of nothing but positive feedback about D's gear and the man himself.

 

[Poohbear]

The carrier is thick . Can't tell the quality that way but it does say something for the source using a thinner carrier oil it means to me his pinning it and not cutting cost . As for D-Red u want find a more stand up guy no where !! As for the quality of his gear it's bar bending gear !! Just change over to the Red Zone gear and see the difference for ur self !!

 

[K. Bone]

Different carrier oils have different viscosity. Even some human grade is really thick.
Try warming it and see if that helps.
Btw there's a shit ton of nothing but positive feedback about D's gear and the man himself.

Thanks man. Appreciate the reply.


Sent from my iPhone using Tapatalk

 

[hwntime]

For thicker oils I microwave a coffee mug with 3/4" water for 50 seconds which brings it to a boil. Then I place vial into the water and let it sit for about a minute and the oil is much thinner.

 

[Muscle mechanic]

My human grade westward or Watson is thickest thing I have used in prolly 6 years.
What is important is how hard is it to draw in 22 ga
Because I am using gear that is thin I can draw and pin in 27ga but even in 22 if I hit scar tissue or tense up if I don't move and relax muscle I have to yell for my wife because the syringe will break.
Relaxing is important. Stuff I have things when it does go from no tense muscle against I gotta go slow or I will damage tissues and get pip from squirting pressure coming out too fast.

Draw gear use a 22ga if hard to push after drawn run hot water over body of syringe for around 1 minute depending on how hot your water gets. When it's hot expansion will make some start coming out of pin tip

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Muscle mechanic]

Bb % also has alot to do with thickness. But I will say some of best gear I every used was thick. Hard to draw and hard to pin.


Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[K. Bone]

My human grade westward or Watson is thickest thing I have used in prolly 6 years.
What is important is how hard is it to draw in 22 ga
Because I am using gear that is thin I can draw and pin in 27ga but even in 22 if I hit scar tissue or tense up if I don't move and relax muscle I have to yell for my wife because the syringe will break.
Relaxing is important. Stuff I have things when it does go from no tense muscle against I gotta go slow or I will damage tissues and get pip from squirting pressure coming out too fast.

Draw gear use a 22ga if hard to push after drawn run hot water over body of syringe for around 1 minute depending on how hot your water gets. When it's hot expansion will make some start coming out of pin tip

Sent from my SAMSUNG-SM-G890A using Tapatalk

Thanks man. What is pip? And what do you do if the syringe does break? I stay relaxed though I don't have that issue at all.


Sent from my iPhone using Tapatalk

 

[Poohbear]

Pain after pin is pip !! If u push hard,enough to break the pins ur doing something wrong especially a 23g .

 

[K. Bone]

Got ya. Thanks Poohbear.


Sent from my iPhone using Tapatalk

 

[Muscle mechanic]

Pain after pin is pip !! If u push hard,enough to break the pins ur doing something wrong especially a 23g .

I never broke one. Lol
Figure of speak. But when I am in glute wrapped around in scar tissue and muscle tenses up its hard for me to push when I still have over 2-1/2 ml inside.
I am doing nothing wrong, trust me lol!
Maybe my glutes are tighter than yours. Lmao!!! More muscle harder is usually the case! Lol
No it's the scar tissue and when I am pushing 3 cc's and get in bad position.

When it happens I leave pin in turn straight lean with butt on counter and presto!

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[MindlessWork]

When the gear is cold I'll run the vial (placed in a ziplock bag) under hot water for a few mins...and it helps with drawing.

As for needles breaking I had one come off the barrel and still stuck in my delt so it took a bit to pull it out as the luer lock base had cracked and came off.

 

[Muscle mechanic]

When the gear is cold I'll run the vial (placed in a ziplock bag) under hot water for a few mins...and it helps with drawing.

As for needles breaking I had one come off the barrel and still stuck in my delt so it took a bit to pull it out as the luer lock base had cracked and came off.

Lol!! They say to always use a little longer and leave some sticking out cause pin can break in u!!! It's happened to people!!! Seriously
When I use 29 gauge slins for igf sometimes if muscle twitches and bends shit out of point.

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[MindlessWork]

Lol!! They say to always use a little longer and leave some sticking out cause pin can break in u!!! It's happened to people!!! Seriously
When I use 29 gauge slins for igf sometimes if muscle twitches and bends shit out of point.

Sent from my SAMSUNG-SM-G890A using Tapatalk

Yup that's what I do so if needle pops off I can still get it out easy with little pip or further injury. I try to stay away from areas with lots of nerves, but yes I once tried quads and got that electric shock feeling which was pretty intense