Brew question

monster-ish

monster-ish

Member
Feb 6, 2017
89
0
Hello everyone. I have a question about my last brew. Hopefully someone can chime in and help a brotha out.

My last brew was tren e dosed at 250mg/ml. My ratios were 2%ba 15%bb
I was only able to filter about 150ml due to filter failure. I've had the remaining unfiltered 100ml sitting in a beaker for about a month.
Yesterday I go to filter the rest and its crashed. Now the filtered tren is sitting just fine in its vials uncrashed.
Anyone know why this would happen? Maybe I should add some more bb?
All input would be appreciated!

Sent from my SM-G955U using Tapatalk
 
Steroidify Below First Post
Riff Vibes
aasraw
Advertise on Hardcore
monster-ish said:
Hello everyone. I have a question about my last brew. Hopefully someone can chime in and help a brotha out.

My last brew was tren e dosed at 250mg/ml. My ratios were 2%ba 15%bb
I was only able to filter about 150ml due to filter failure. I've had the remaining unfiltered 100ml sitting in a beaker for about a month.
Yesterday I go to filter the rest and its crashed. Now the filtered tren is sitting just fine in its vials uncrashed.
Anyone know why this would happen? Maybe I should add some more bb?
All input would be appreciated!

Sent from my SM-G955U using Tapatalk
Click to expand...

Had you tried to re~heat it in the oven..? Yet..!
 
I would try that first, and filter it , vial it up & wait n see, at least you have 150 ml gtG for now.

Maybe just out the septum's on, or out the whole batch in two 50 jugz, for time being to see if holds, if not then go the extra bb route, keeping in mind it's going to something kesd than the original 250mg/ml, do the math aheSd of time, and only try bumping bb by 2 additional​ % @ a time til.right.
 
MotorCityMuscleMachine said:
I would try that first, and filter it , vial it up & wait n see, at least you have 150 ml gtG for now.

Maybe just out the septum's on, or out the whole batch in two 50 jugz, for time being to see if holds, if not then go the extra bb route, keeping in mind it's going to something kesd than the original 250mg/ml, do the math aheSd of time, and only try bumping bb by 2 additional​ % @ a time til.right.
Click to expand...
Cool I'll give that a try first and see what happens. I really don't wanna add any more bb if I don't have to. Thanks brotha!

Sent from my SM-G955U using Tapatalk
 
At the very least, I'd get it out if the beaker, and into a glass container, & check to see if the composition if the plastic had changed, like try scraping the side walls with a senior sharp knife to see if it had softened from the solvents
Then you'll know, if it may, or may not be salvageable
 
Your welcome, best if luck, I need to crash for a bit, (Midnights ) & dragging, but fill me)/us in on what you find, it come up with.

I'll follow up w)ya L8TR'S...!

MotorCity
 
MotorCityMuscleMachine said:
At the very least, I'd get it out if the beaker, and into a glass container, & check to see if the composition if the plastic had changed, like try scraping the side walls with a senior sharp knife to see if it had softened from the solvents
Then you'll know, if it may, or may not be salvageable
Click to expand...
I'll give that a try. Hope I didn't ruin the batch from keeping it in the plastic too long. Don't want to have to dump it

Sent from my SM-G955U using Tapatalk
 
Advertise on Musclemecca
aasdirect
monster-ish said:
I'll give that a try. Hope I didn't ruin the batch from keeping it in the plastic too long. Don't want to have to dump it

Sent from my SM-G955U using Tapatalk
Click to expand...

Hey, & there's other way more knowledgeable fellas than what I've to offer, maybe Yates will see this, and /or hit him up, I don't think he'll mind with a suggestion or two.

Good luck broski...!
 
If it’s been sitting in a plastic filter bottle for a month you need to just throw it away in the trash and start over.
 
monster-ish said:
Breaks my heart to hear this. But thanks for the advice bro

Sent from my SM-G955U using Tapatalk
Click to expand...

Learned this lesson the hard way bro. Solvents actually fuse the plastic into the oil and it will fuck you up bad. This is with test e that I made with 10% bb so higher solvent content will only be worse. I’ve had good luck getting on eBay and getting used 500ml Pyrex media bottles for real cheap and your filter kits will thread right on to them. Best investment I ever made since I don’t like to vial right away since I make an assortment of sizes.
 
Yates84 said:
Learned this lesson the hard way bro. Solvents actually fuse the plastic into the oil and it will fuck you up bad. This is with test e that I made with 10% bb so higher solvent content will only be worse. I’ve had good luck getting on eBay and getting used 500ml Pyrex media bottles for real cheap and your filter kits will thread right on to them. Best investment I ever made since I don’t like to vial right away since I make an assortment of sizes.
Click to expand...

Thanks for the heads up. I've actually been looking for the glass media bottles that screw right into the bottle top filters but everyone I've gotten so far is too small where It screws in. Any chance u have a link?

Sent from my SM-G955U using Tapatalk
 
monster-ish said:
Thanks for the heads up. I've actually been looking for the glass media bottles that screw right into the bottle top filters but everyone I've gotten so far is too small where It screws in. Any chance u have a link?

Sent from my SM-G955U using Tapatalk
Click to expand...

Sounds like I got lucky then! Only numbers I see on there are 1395 so maybe that’s the model number
 

Similar threads

TheWizard
New to Home Brew - quick question
Replies
7
Views
2K
Pez
Pez
I
Bold cyp brew
Replies
0
Views
511
I8sum2
I
PDO9122
DHB brew
2
Replies
33
Views
4K
eric123
E
Seth(The Spartan)
What's the highest concentration you can brew tren a?
Replies
7
Views
2K
suraonyx23
suraonyx23
Seth(The Spartan)
DHB Brew (1-Test Cyp)
Replies
14
Views
2K
MotorCityMuscleMachine
M
Back
Top
[FOX] Ultimate Translator
Translate