How To Make Testosterone Enanthate Homebrew In 4 Steps

[AASraw]

Step 1: Preparation​

Cleaning and Sterilizing
Before starting, ensure all equipment and the working environment are thoroughly cleaned and sterilized. This is crucial to avoid contamination and ensure the purity of the final product. Use alcohol or a sterilizing solution to wipe down all surfaces and tools.

Measuring Raw Materials
Use a digital scale to measure the required amounts of testosterone enanthate powder, benzyl alcohol, benzyl benzoate, and grapeseed oil. The typical ratio is:

• Testosterone Enanthate powder: 62.5 grams
• Benzyl alcohol(BA): 5ml (2%)
• Benzyl benzoate (BB): 50 ml (20ml)
• Grapeseed oil: 148.13ml

Step 2: Dissolve and Mix​

Dissolve the Testosterone Enanthate Powder
Pour the weighed Testosterone Enanthate Powder into a beaker, add the benzyl alcohol and benzyl benzoate, heat with a heater, and stir with a stirring rod until the powder is completely dissolved. This may take some time and patience. Make sure the mixture is homogeneous.

Add Grapeseed Oil
Once the powder is completely dissolved, slowly add the grapeseed oil while continuing to stir. Make sure the mixture is homogeneous and there are no layers. The grapeseed oil helps to dilute the solution and make it suitable for injection.

Step 3: Filter and Sterilize​

Filter the mixture
Use a syringe and filter to filter the mixture into another clean beaker. Filtering removes any undissolved particles and ensures the purity of the solution. This step is critical to the safety and efficacy of the final product.

Sterilize
Pour the filtered mixture into a sterilized vial and sterilize it. You can use an oven for sterilization, set the temperature to around 200 degrees Fahrenheit (93 degrees Celsius) and the time to 20 minutes. This step ensures that any remaining bacteria or contaminants are eliminated.

Step 4: Storage and Use​

Storage
The sterilized testosterone enanthate solution should be stored in a dry, cool place away from direct sunlight. Make sure the vial is well sealed to prevent contamination. Label the vial with the preparation date and solution concentration.

Use
Before use, always consult a doctor or professional to ensure the correct dosage and method. During use, maintain aseptic technique to avoid infection. Never use a solution that looks cloudy or has visible particles.

 

[AASraw]

Making Testosterone Enanthate requires strict steps and meticulous operations. This guide is just for reference only. The most important is that always remember to prioritize safety and comply with legal requirements when conducting any operations.

Of course, if you want to find reliable test e powder supplier, AASraw is always here to ptovide top-notch steroid raw powder.